CitriSurf 77 Plus – Stainless Steel Spray – Cleaner & Protectant – 22 oz Bottle
CitriSurf 77 Plus is a high-quality stainless steel spray blended with chemicals formulated for cleaning, rust removal and passivation of stainless steel products It is provided in trigger sprayer bottles for applications where it is desired to spray the product on a local area. CitriSurf 77 Plus is specifically designed to provide a portable, low cost and efficient removal of contaminants and all rust and free iron from the surface of stainless steel, providing the highest chrome oxide levels possible.
Approx. wt. /gallon
Normal working concentration
pH at working concentration
Citric acid, water, proprietary ingredients
Room temp or higher
Use as received
22 oz. trigger sprayer bottles.
CitriSurf is an excellent cleaner by itself for many cleaning and passivation processes. However, to assure the best results, the parts or areas to be passivated may be cleaned with an appropriate cleaning solution prior to treatment with CitriSurf solution, especially when heavy grease and oils are present. If thorough cleaning is not possible during use in the field, wipe the surface free of dirt and oils prior to application.
The parts or areas to be cleaned and passivated should be sprayed, immersed or wiped with CitriSurf 77 Plus to completely wet the surfaces, especially in crevices or in areas where any rust or corrosion may have occurred. The surface must be soaked or left moist with the CitriSurf 77 Plus solution for a period sufficient to remove all corrosion, free iron, and contaminants from the surface. This is typically 15-30 minutes at room temperature, depending on the grade of stainless steel, hardness, and the condition of the surface. This should be determined by testing your product. The coverage is approximately 90 square feet per 22 oz. bottle. If heavy rust needs to be removed, Scotch Brite (TM) or other non iron containing abrasive may be helpful. Difficult rust or corrosion must be tested to determine the exact best conditions for removal.
Rinse thoroughly with clean water and dry completely in air immediately. Drying can be accelerated by the use of a hot air blower (i.e. hairdryer), clean cloth, or another drying medium to attain a highly passive surface. Repeat process if needed to obtain desired results.
Notes on Use
Although CitriSurf 77 Plus will not harm most metal appliances or surfaces, and will enhance the brightness when used as directed, test a small area before full application.
Although very safe in normal use, CitriSurf 77 Plus is a citric acid based material, and as such it may cause irritation to exposed surfaces of the body. See Material Safety Data Sheet before using this material. Rubber or plastic gloves should be worn to apply the product to the surface or to wipe it dry. Inhaling mist may be irritating to nose and throat.
Do not apply CitriSurf to electrical wiring or other conductive material that is connected to electrical current without first turning off all electricity! CitriSurf is a water based conductive material. Serious injury or death con occur from electrical shock.
Do not leave concrete or carbon steel exposed to CitriSurf for any period of time. Damage to these materials will occur with prolonged exposure.
Dispose of according to all federal, state and local regulations.
CitriSurf 77 Plus should be stored at temperatures between 50°F and 120°F in the bottles supplied with the product. (If accidentally frozen, thawing will return the product to normal.)
– Length: 9″
– Width: 3.33″
SSCS77PLUS : 77 , UPC : 616320731151
Please Contact Us should you have any questions or just for a few tips and tricks. Thank you for choosing Devline!