Surface Mount Deck Rigging Toggle Terminal – Swage – T316 Stainless Steel



Surface Mount Deck Rigging Toggle Terminal  – Swage

DEVLINE Surface Mount Rigging Toggle Terminals are T316 marine grade stainless steel and attach to 1/8” diameter cable with the use of a crimper or hand swaging tool. The toggle allows you to adjust the pitch of your cable run up to 135 degrees or a straight run. Great for stairs, angled pitch, elevation changes, or straight and level runs in your railing or marine application.

Our stainless is suitable for outdoor or indoor and has an excellent shine and radiance to it. Looks much nicer than galvanized and holds up against corrosion. Perfect for installation on exterior decks, marine rigging, or interior applications. Two mounting screws (not included) and a hand crimping tool (not included) is all you will need to mount your toggle. We recommend using 1/4″ x 1.5″ Stainless Hex Head lag screws. LUX Surface Mounting Deck Toggles are for cable runs that must attach to the surface of a support structure (deck, wood, concrete, etc).

These are terminals and will need a tensioner on the other end of each strand to tighten the cable for you. Please check local building codes before purchasing and installing them.

Dimensions & Weight

– Overall Length: 2.61″

– Mounting Plate: 2.02″ x 0.65″

– Swaging Area: 1.50″ x 0.25″

– Weight: 0.05 lb

Those who have purchased this deck rigging toggle also purchased the following items from us

– Lag Bolts > 1.5″ Bolts, 2.5″ Bolts

– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft

– A Cable Cutting & Swaging Tool > All Tools

– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus

DLR7806-HS :   1/8″ ,  UPC :  602401885721


Please feel free to Contact Us should you have any questions or just for a few tips & tricks!

Additional information

Cable Size

1/8", 3/16", 1/4"


No products in the cart.