Surface Mount – Heavy Duty Turnbuckle Tensioner – Swage



Swage Surface Mount Heavy Duty Turnbuckle Tensioner

DEVLINE Surface Mounting Deck Toggles with a heavy-duty turnbuckle are T316 marine grade stainless steel attach to 1/8” diameter cable with a crimper or a hand swaging tool. The toggle allows you to adjust the pitch of your cable run up to 135 degrees or do a straight run. Great for stairs, angled pitch, elevation changes, or straight and level runs in your railing or marine application.

Our stainless is suitable for outdoor or indoor and has an excellent shine and radiance to it. Looks much nicer than galvanized and holds up against corrosion. Perfect for installation on exterior decks, marine rigging, or interior applications. Two mounting screws (not included) and a hand crimping tool (not included) is all you will need to mount your toggle.

We recommend using 1/4″ x 2″ Stainless Hex Head lag screws. DEVLINE Surface Mounting Deck Toggles with a turnbuckle are for cable runs that must attach to the surface of a support structure (deck, wood, concrete, etc). These are tensioners that will tighten the cable for you. Pair these with one of our LUX Terminals or use a turnbuckle/tensioner on both ends for longer runs or runs with turns in them. We recommend 1/8″ cable for indoor or outdoor projects because it allows for better scenic viewing while still passing building code in most areas. What is included: 1 x 1/8″ stainless steel heavy duty turnbuckle toggle. Not included: Hand crimping tool & lag screws.

Dimensions & Weight

– Total Length Closed: 4.09″

– Total Length Open: 5.72″

– Swaging Section: 1.17″ x 0.24″

– Barrel Length: 2″ or 3.75″

– Mounting Plate: 1.97″ x 0.64″

– Weight: 0.10 lb

Those who have purchased this heavy-duty turnbuckle also purchased the following items from us

– Opposite End Hardware > Swage Surface Mount Deck Rigging Toggle Terminal for 1/8″ Cable

– Lag Bolts > 1.5″ Bolts, 2.5″ Bolts

– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft

– A Cable Cutting & Swaging Tool > 16 Ton Hydraulic Swaging Tool24″ Cutting & Cable Swaging ToolCable Cutter Tool

– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus

SSMDTTB  :  1/8″  ,  UPC  :   612520481650


Please feel free to Contact Us should you have any questions or just for a few tips & tricks!

Additional information


Order with confidence today as we gladly exchange hardware as needed and you can send back any hardware that you do not use for a full refund.


Add one item to begin with and adjust the quantities in your cart to the desired amount needed.  Thank you!

Cable Size

1/8", 3/16", 1/4"

Barrel Length

2", 3", 3.75", 5"


There are no reviews yet.

Be the first to review “Surface Mount – Heavy Duty Turnbuckle Tensioner – Swage”

Your email address will not be published. Required fields are marked *


No products in the cart.