Sale!

Swage Surface Mount Turnbuckle Steel Cable Tensioner 3″ Barrel for 1/8″ Cable

$18.50 $9.99

961 in stock

Swage Surface Mount Turnbuckle Steel Cable Tensioner 3″ Barrel for 1/8″ Cable

LUX Surface Mounting Deck Toggles with a turnbuckle are T316 marine grade stainless steel attach to 1/8” diameter cable with a crimper or a hand swaging tool. The toggle allows you to adjust the pitch of your cable run up to 135 degrees or do a straight run. Great for stairs, angled pitch, elevation changes or straight and level runs in your railing or marine application.

Our stainless is suitable for outdoor or indoor and has an excellent shine and radiance to it. Looks much nicer than galvanized and holds up against corrosion. Perfect for installation on exterior decks, marine rigging or interior applications.

Two mounting screws (not included) and a hand crimping tool (not included) is all your will need to mount your toggle. We recommend using 1/4″ x 2″ Stainless Hex Head lag screws.

LUX Surface Mounting Deck Toggles with a turnbuckle are for cable runs that must attach to the surface of a support structure (deck, wood, concrete, etc). This is a steel cable tensioner that will definitely tighten the cable for you. Pair these with one of our LUX Terminals or use a turnbuckle / tensioner on both ends for longer runs or runs with turns in them.

We recommend 1/8″ cable for indoor or outdoor projects because it allows for better scenic viewing while still passing building code in most areas.

What is included: 1 x 1/8″ stainless steel Deck toggle turnbuckle. Not included: Hand crimping tool & lag screws.

Dimensions & Weight

– Total Length Closed: 5.90″

– Total Length Open: 8 5/8″

– Swaging Section: 1.40″ x 0.21″

– Barrel Length: 3″

– Mounting Plate: 1.79″ x 0.43″

– Weight: 0.15 lb

Those who have purchased this steel cable tensioner also purchased the following items from us

– Opposite End Hardware > Swage Surface Mount Deck Rigging Toggles

– Lag Bolts > 1.5″ Bolts, 2.5″ Bolts

– 1/8″ Stainless Steel Cable > 100ft, 500ft, 1000ft

– A Cable Cutting & Swaging Tool > 16 Ton Hydraulic Swaging Tool24″ Cutting & Cable Swaging ToolCable Cutter Tool

– Stainless Steel Spray Cleaner & Protectant > CitriSurf 77 Plus

 

Please feel free to Contact Us should you have any questions or just for a few tips & tricks!

Reviews

There are no reviews yet.

Be the first to review “Swage Surface Mount Turnbuckle Steel Cable Tensioner 3″ Barrel for 1/8″ Cable”

Your email address will not be published. Required fields are marked *

Cart

No products in the cart.

cable-rail-info