Deck Toggle For Cable Railing - For 3/16" Cable - Type 316 Stainless Steel
Deck Toggle For Cable Railing - For 3/16" Cable - Type 316 Stainless Steel
  • Load image into Gallery viewer, Deck Toggle For Cable Railing - For 3/16" Cable - Type 316 Stainless Steel
  • Load image into Gallery viewer, Deck Toggle For Cable Railing - For 3/16" Cable - Type 316 Stainless Steel

Deck Toggle For Cable Railing - For 3/16" Cable - Type 316 Stainless Steel

Vendor
DEVLINERAIL
Regular price
$5.75
Sale price
$5.75
Regular price
$0.00
Sold out
Unit price
per 

Deck Toggle for Cable Railing – for 3/16″ Cable – Type 316 Stainless Steel

This surface mount deck toggle of ours is a versatile piece of rigging hardware. Having the toggle on this anchor terminal makes installing straight and angled runs a breeze. It’s made of T316 steel so you can install it outside in humid climates without having to worry about rusting. We’ve seen customers use it for both residential and commercial projects.

Since this deck toggle only anchors the cable, you will need to have a steel wire tensioner on the opposite end. You are welcome to browse through our tensioner options but the most common partner for this deck toggle would be our Adjustable Turnbuckle Tensioner (https://sa-materials.com/p/adjustable-turnbuckle-tensioner-with-deck-toggle-for-3-16-inch-cable-t316-steel/) . During the install you’re going to need a Cable Cutter Tool (https://sa-materials.com/p/3-edged-cable-cutter-tool-8-long-for-1-8-3-16-steel-wire-cable/)  on hand so you can cut your lines exactly right. With swage fittings like this deck toggle, a hand swaging tool will be needed as well. For those who’d like a tool that can perform both tasks, we have a 24″ Cutter / Swager (https://sa-materials.com/p/steel-cable-crimper-cable-cutter-tool-for-1-8-inch-and-3-16-inch-wire-rope-fittings/)  which doesn’t take too much muscle to use.

Be sure that you have 3/16″ cable to use with this deck toggle. We’ve found that the 1×19 configuration works well and looks really good too. On a handrail, it’s good to have cable you can grab with your and without it being too rough and that’s another reason we like the 1×19 option.

 

Surface Mount Deck Toggle Specifications

– Total length of deck toggle is 3-3/4″

– You will need to use 3/16″ cable with these toggles

– The mount screw holes are 0.25″ in diameter

– There is a distance of 1.30″ between the screw mount holes