Hand Swage Jaw Terminal - Stainless Steel Cable End Fittings For 1/8" Wire
Hand Swage Jaw Terminal - Stainless Steel Cable End Fittings For 1/8" Wire
  • Load image into Gallery viewer, Hand Swage Jaw Terminal - Stainless Steel Cable End Fittings For 1/8" Wire
  • Load image into Gallery viewer, Hand Swage Jaw Terminal - Stainless Steel Cable End Fittings For 1/8" Wire

Hand Swage Jaw Terminal - Stainless Steel Cable End Fittings For 1/8" Wire

Vendor
DEVLINERAIL
Regular price
$4.95
Sale price
$4.95
Regular price
$0.00
Sold out
Unit price
per 

Hand Swage Jaw Terminal – Stainless Steel Cable End Fittings for 1/8″ Wire

Quality cable end fittings are important when putting up a wire railing. This hand swage jaw terminal won’t let you down. It is made with type 316 steel so you won’t have to worry about it breaking or rusting on you. When used for outdoor applications it’s common for build-up to appear over time, at that point you can use a simple stainless steel cleaner and it’ll clean right up for you. They are designed to anchor / hold the cable from one end of your run. To tighten and hold the cable, you will need something like our Turnbuckle Tensioner (https://sa-materials.com/p/steel-turnbuckle-tensioner-with-toggle-for-1-8-inch-wire-rope-t316-stainless/)  on the opposite end.

Before heading off to do the install, it’s smart to make sure you have the tools needed. When you buy stainless cable for your project it normally comes in one coil, you’ll then need a cable cutter tool to cut your lengths as you go along. It’s wise to make sure you’re using a cutter that is meant for steel cable, that way you won’t end up with flat or uneven ends. In order to fasten our cable end fittings to the wire you will need a swage crimping tool as well. It is suggested that you swage each fitting 3 times to be sure it has a good hold.

You will also need 1/8″ inch stainless steel cable to complete the job. For cable railing systems, we always recommend the 1×19 configuration for its good looks, and because it isn’t very rough when you grab it.

 

Hand Swage Jaw Terminal Specifications

– This terminal is a total of 2-5/8″ long

– You will need 1/8″ cable